Italian mountain road diorama (part one)

 

 

 

This started out as groundworks for a vehicle project that turned out to be slightly too small and then took on a life of its own.

My inspiration was taken from images of the terrain around the Brenner pass in northern Italy during the German army’s retreat north through the mountains. Looking at photographs of the kind of materials that were used to build these roads I found a contemporary pic of a cycle race over the same terrain. I liked the idea of the tight bend and added height element that it would bring to a display.

Schwerer Wehrmachtschlepper (sWS) armoured cargo version Chapter 12: Constructing a base part 2

Before I could add the AK Asphalt texture paste to the raised road section the piece required framing. I had purchased some oak veneer but test fitting exposed an issue with the cut of the Styrofoam on one of the sides. I had used a foam cutter, and I had started from what I figured was a nice straight edge. Unfortunately, I didn't spot a couple of wavy undulations in it and adding the veneer would only expose these flaws. So, to plan B! I had just enough 1.6mm basswood left from a previous project so I marked, cut, and added four nice straight side pieces. I cut two sides a touch long so I could sand them square.....or as square as I managed to cut the Styrofoam😉!

Once they had cured to the styrofoam and with the aid of UHU Por glue, and each other with wood glue, AK dark mud mixed with tea leaves and scatter was added into any small gaps that were left, and blended into the existing terrain.

 

Schwerer Wehrmachtschlepper (sWS) armoured cargo version Chapter 11: Constructing a base part 1

My intention was always to display the sWS on a small vignette. I had made some rough drawings before vehicle construction began and had articulated the front suspension, and angled the front wheels for this purpose. The plan is to display the vehicle recently abandoned in a muddy field after attempting to rejoin a section of roadway. I plan to include a small section of road, a shell crater, a telegraph pole or tree, and a selection of figures.

Whilst sketching out the scene it became obvious that whilst the fresh shell crater gave narrative as to why the vehicle might have been abandoned, adding a decent sized crater would enlarge the size of the base more than I had first intended. To this end I added only a portion of it in the corner. To give it further interest I then raised the height of the roadway onto an embankment beyond a small ditch.

Mercedes L4500A (Zvezda) Chapter 11: Creating a diorama

Previous chapter 

I starting to build and paint some accessories to be placed in the truck but then I got side tracked, as I often do. So, the truck and trailer were relegated to a nice dust free storage box. Early in 2024 I got some inspiration from the excellent ‘The Army that got away' publication which restarted the project. The book tells the story of how the German 15th Army largely escaped from their Atlantic coastal defensive positions after D-Day. Pursued without any real urgency they escaped via the Scheldt estuary pretty much intact.  There is some great info and period images that I’ve never seen before, and it gave me some ideas on how I could finish off this project. 

Contructing a simple, cheap, framed groundwork base

Groundwork

I've not attempted too many bases for my finished models, and the ones I have had made have been minimal affairs utilising items I've found about the house. Old wooden name plates and even an Ikea shelf! Not the best looking or ideal material but they have been a test bed and cost me nothing. 

I have been slowly acquiring various groundwork products such as cheap picture frames, clays and sculpting materials, vegetation, ground mats and the like. To date I have only used a few of these materials, and the bases built from them have been very small affairs, showing simple road or track sections. As for buildings I have messed around with a selection of Miniart's vacuum products but didn't get on with them too well!